MRI Network - The Eatman Group

[full-time] Mechanical Design engineer at Fred Eatman

2008-04-09 07:45:19

Location: North Carolina
URL: http://www.mrinewbern.com

Description:

An eastern North Carolina manufacturing plant has an opening for a Mechanical Design Engineer.

Must have experience in the following areas —
Evaluating design ideas by assessing stress calculations soundness for design and manufacturability

Develop design concepts and drawings using CADD software and equipment. Create product specifications

Provide technical assistance to other employees, engineers and staff.
Some travel necessary

Technical qualifications:

BS Degree — Mechanical or Design Engineering
Minimum of five (5) years experience with mechanical product design – preferably in metal fabrication or the telecommunications industry.
Good expience with CAD – Pro-E, SolidWorks, etc

Apply to this job

[full-time] Customer Service Position at F Eatman

2008-03-04 05:24:02

Location: North Carolina
Description:

Our client is seeking a person for the costumer service department.
This position is open due to a promotion within the plant

The customer service position is the liasion with customers, the manufacturing operations department, wholesale distribution and planning functions. This is one of the most critical positions in this high volume plastics plant.

This person must be good at telephone communications and friendly with our costumers. Follow up and attention to detail are essential.

MRP computer skills are also necessary for this position —-. SAP knowledge would be perfect

Apply to this job

[full-time] Plant Accountant at F Eatman

2008-03-04 05:08:50

Location: North Carolina
Description:

Message : Plant Accountant

High volume, Eastern NC Manufacturing plant is seeking a replacement for its plant accountant. This position is open due to a promotion.

The applicant should have a 4 year degree in accounting, 5+ years in Manufacturing accounting and at least 2 years of supervision in an accounting department.

Ideally the candidate will have experence with SAP software.

Qualified candidates should send resume by email – Interviewing begins this week – Mar 1, 2008

Apply to this job

[full-time] Process electronic engineer at F Eatman

2008-02-21 07:44:44

Location: Virginia
URL: http://www.mrinewbern.com

Description:

Position Title: Process Engineer

Reports To: Manager, Manufacturing Engineering

General Function: Provide technical and continuous process improvement leadership. Develop, document and maintain world-class processes and production strategies. Design innovative fixtures, methods and tools. Must be capable of developing and implementing manufacturing processes that prove successful on complex engineered-to-order machinery. Serve as the key interface between assembly and product engineering to assure cost-effective and lead time-reducing assembly techniques. Responsible for Lean Continuous Process Improvements resulting in meeting stated cost savings and waste elimination at all levels.
Criteria for Process Engineer, is as follows:
· Openly support Quality Management System ideals and adhere to applicable work instructions, procedures and forms.
· Must have good technical writing and verbal communication skills.
· Must have strong, positive personality in order to effectively deal with resistance to change.
· Manage projects and available resources to completion while staying within budget, meeting or exceeding deadlines and fulfilling quality requirements.
· Must have good mechanical aptitude and background.
· Have basic understanding of machining processes such as milling, turning, grinding and material characteristics.
· Experience using Toyota Production System tools such as 5S or 6S, process mapping, setup reduction, etc. Be knowledgeable in most forms of waste elimination. Be capable of performing time studies.
· Be comfortable training employees on Lean principles.
· Be familiar with root cause analysis and identifying core process problems. Also be able to recommend corrective action once root cause is identified.
· Have a basic understanding of GD&T.
· Work as a self-directed team member with minimal daily supervision.
· Ability to communicate clearly with all levels of personnel inside and outside the company.
· Interact well with production employees.
· Be familiar with mechanical and electrical bill of material structures. Ability to read wiring diagrams helpful.
· Be familiar with fabrication, piping, tube-bending.
· Facility layout and solid modeling capabilities preferably with AutoCAD/AutoCAD Inventor.
· Ability to identify need for and design unique fabrication and assembly tools. Implement world-class assembly techniques.
· Justify capital improvement expenditures and monitor implemented savings.
· Understand and use all applicable enterprise business systems currently in use by BPM.
· Provide technical guidance and input to other functional areas relative to vendor management, cost control, supplier networking, design improvements for commercial items and new vendor sourcing.
· Thoroughly understand role as a supplier and the machinists, assemblers and wiring technicians as the customers.

Experience:

Minimum of 10 years experience in a Process/Industrial Engineering or similar position in an OEM machine assembly environment. A combination of Process/Industrial Engineering experience and degree in an Engineering discipline may constitute 5 of the 10 years. Practical technician or assembly experience may constitute up to 5 of the 10 years. An industrial, process, mechanical or other engineering degree is highly desirable.

Apply to this job

[full-time] Mechanical Engineer FO at Manufacturing foe

2008-02-12 12:12:33

Location: Virginia
URL: http://www.mrinewbern.com

Description:

Position Description

Position Title: Mechanical Engineer II

General Function:

Responsible for the mechanical BOM issue, Redesign, and Value Engineering of all products under the Standard Products umbrella. Assist Service and Sales in technical discussions on same product.

· It is every employee’s responsibility to be aware of and work with, current documented Quality Management System as it pertains to their job requirements.
· Design and layout of mechanical components in AutoCad and Solid Modeling,
· Selection of bearings, gearing, pneumatic and hydraulic components,
· Value Engineering,
· Creation of Bills of Materials
· Evaluate customer specifications and comply with machinery output.
· Assist in the continuous process improvement of the standard product line.
· Work on special projects assigned by the Director, Product Engineering.
Manufacturing/Assembly Personnel, Sales and Marketing Personnel, Service Personnel

Reports To: Director, Product Engineering

Education:

Must have a BSME or equivalent 4-year experience in related mechanical field.

Experience:

Must be proficient in AutoCAD 2000 and Solid Modeling – Preferably AutoDesk Inventor 7.0 (or later) or Equivalent Solid Model Package (e.g. Solid Works). Must be familiar with industry design drafting standards such as ANSI Y14.5 (1994 or later). Must have good technical written communication skills. Must be familiar with typical Microsoft Office software. Must have a working knowledge of ISO 9001. Design Experience in High Speed Rotating Machinery and knowledge of CE (European Safety Standards) are a plus.

Apply to this job

[full-time] Electrical Engineering Manager at Manufacturing foe

2008-02-12 09:01:39

Location: Virginia
URL: http:////www.mrinewbern.com

Description:

Manager, Electrical Engineering

General Function:

To manage and lead (5 dir rpts) all electrical engineering resources to ensure the delivery of defect free products, services and information that meet our customer’s requirements through continuous improvement of our quality management system. This encompasses the need for assessing resources, interviewing, hiring and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees and resolving conflicts. To lead the effort in supplying state-of-the-art electrical components and/or processes.

Electrical Engineering Manager – Job Description

· Training of direct reports to enhance their technical and soft skills growth, as well as long term advancement .
· Leading continuous process improvements of BPM Machinery with respect to electrical design, cost reduction and related issues.
· Identification and implementation of electrical engineering standards e.g. CE Code (pertaining to EMC, EMI, LVD), NEC and Machinery Code.
· Successful completion of tasks, projects or objectives assigned by the Director CME and Manager PCS.
· Carries out supervisory responsibilities in accordance with the organization’s policies and applicable laws.
· Coordinate electrical related Customer Service functions with our customers.
· Other duties as assigned. Principal Working Relationship:
· Standard Product Engineering Personnel
· PCS Engineering
· Customers
· Service Department Education: Must have a MS degree as well as a BSEE with 5-years experience in related field, or BSEE with 8-years experience on Belvac Production Machinery. Must be proficient in AutoCad 2000 (or later). Must have good technical written communication skills. Must have good technical verbal presentation skills. Experience: The Electrical Engineering Manager will have a working knowledge in:
· Design, Issue & Implementation of electrical control systems for all Standard Product Machinery and Plastic Container System Machinery (PCS) to be collectively referred to as BPM Machinery.
· PLC Programming,
· CE Code as it pertains to EMC, EMI, LVD, and updates thereof.
· NEC and Machinery Code.
· Typical Microsoft Office software.
· ISO 9001 as it pertains to Belvac’s Quality Management System.
· Effective Management of Technical Professionals or Appropriate Training Thereof.

Apply to this job